Product ID:SPILFYTER, MERCURY CONTROL POWDER, 5230 SERIES
MSDS Date:07/01/1993
FSC:6810
NIIN:00N054329
MSDS Number: CCYJY

JV MANUFACTURING CO INC

963 ASHWAUBENON STREET
GREEN BAY, WI 54304
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-334-9092

Cage: IO899

JV MANUFACTURING CO INC

GREEN BAY, WI 54304 US

Telephone: 800-334-9092

Cage: IO899

SULFUR

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: <95.0%

OSHA PEL N/K

ACGIH TLV: N/K

SILICA, AMORPHOUS, PRECIPITATED AND GEL; (SILICON DIOXIDE

CAS: 112926-00-8

RTECS: VV7315000

Fraction By Weight: >5%

OSHA PEL N/K

ACGIH TLV: N/K

FOR THE 5230 SERIES SPILFYTER FOR HAZ MATLS -

RTECS: 9999999ZZ

MSDS'S FOR THE CHEMICALS THAT THE MERCURY CONTROL

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:MAY CAUSE IRRITATION.
EXPERIENCED AS MILD DISCOMFORT AND SEEN AS SLIGHT REDNESS. SKIN:MAY
CAUSE IRRITATION. ABSORPTION (SKIN):NONE KNOWN. INHALATION:MAY
CAUSE IRRITATION TO UPPER RESPIRATOR Y TRACT. CHRONIC:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYES:REDNESS, TEARING.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYES:IMMED FLUSH W/PLENTY OF WATER FOR AT LST 15 MINS. HOLD
EYELIDS APART WHILE FLUSHING TO RINSE ENTIRE SURF OF EYE & LIDS
W/WATER. SEEK MED ATTN. SKIN:REMOVE CONTAM CLTHG. BRUSH OFF EXCESS
PWDR W/DR Y TOWEL. WASH AFFECTED AREA W/PLENTY OFSOAP & WATER FOR
SEVERAL MINS. SEEK MED ATTN IF IRRIT DEVELOPS/PERSISTS.
INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF BRTHG
IS DFCLT, (SUPDAT)

Flash Point Method:CC
Flash Point:370F,188C
Extinguishing Media:USE WATER SPRAY, ALCOHOL FOAM, DRY CHEMICAL OR
CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION, TOXIC FUMES
OF SULFUR DIOXIDES (SO*2) ARE EMITTED. DUST MAY FORM A FLAMMABLE OR
EXPLOSIVE MIXTURE IN AIR.

Spill Release Procedures:AVOID BRTHG DUST. CONTAIN LEAKING/SPILLED
MATL. CLEAN-UP USING SHOVELS, SWEEPING/VACUUM SPILLED MATLS & PLACE
INTO APPRVD DISP CNTNR FOR PROPER DISP. ALL SPILLS SHOULD BE HNDLD
ACCORDING TO PREDETERMI NED PLAN I/A/W 29 CFR 1910.120 - HAZ
WASTE(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY & WELL VENTED AREA
AWAY FROM THOSE CHEMS LISTED IN REACTIVITY DATA SECTION. KEEP AWAY
FROM FLAMM MATLS & SOURCES OF HEAT/FLAME.
Other Precautions:PROT CNTNR FROM DMG. KEEP CNTNR TIGHTLY CLSD. DO NOT
BREATHE DUST. DO NOT GET IN TO EYES, ON SKIN/CLTHG. FLAMM SOLID.
PRODS ARE ONLY TO BE USED BY PEOPLE HAVING EXPERTISE IN USING HAZ
PRODS. NOTE! THI S MSDS HAS BEEN PREPARED ONLY (ING 3)

Respiratory Protection:USE NIOSH APPRVD AIR PURIFYING RESP W/APPROP
DUST & METAL FUME PROT. NIOSH APPRVD SCBA SHOULD BE USED FOR LG
SCALE APPLICATIONS. ANY NIOSH APPRVD RESPS WORN IN CONJUNCTION
W/THIS PROD SHOULD BE WORN I /A/W 29 CFR 1910.134 - RESP PROT.
Ventilation:LOCAL EXHAUST &/OR MECHANICAL (GENERAL):AS APPROPRIATE.
Protective Gloves:SUITABLE CHEMICALLY RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . PROT CLTHG SHOULD BE USED WHEN WHILE WORKING W/THIS PROD
(SUPDAT)
Work Hygienic Practices:WORKERS SHOULD WASH EXPOSED SKIN THOROUGHLY
AFTER HANDLING W/SOAP & WATER.
Supplemental Safety and Health
VP:1 @ 183C; 10 @ 246C. FIRST AID PROC:GIVE OXYG. SEEK MED ATTN.
INGEST:DO NOT INDUCE VOMIT. CALL MD/POIS CTL CTR IMMED. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCON PERS. SPILL PROC:OPERATIONS & EMER
RES PONSE. EYE PROT:& FULL LGTH FCSHLD . OTHER PROT EQUIP:I/A/W 29
CFR 1910.132 - PERSONAL PROTECTIVE EQUIPMENT.

Boiling Pt:B.P. Text:833F,445C
Melt/Freeze Pt:M.P/F.P Text:240F,116C
Vapor Pres:SUPP DATA
Vapor Density:8.8
Spec Gravity:2 (H*2O=1)
pH:5.9
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:YELLOW CRYSTALS, POWDER; ODORLESS.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, MOST COMMON METALS, HYDROGEN, CHLORINE,
FLUORINE, ORGANIC MATERIALS AT ELEVATED TEMPERATURES.
Stability Condition to Avoid:WHEN HEATED TO DECOMPOSITION TOXIC FUMES
OF SULFUR DIOXIDES ARE FORMED.
Hazardous Decomposition Products:THERMAL DECOMPOSITION, OXIDES OF
SULFUR, I.E., SULFUR DIOXIDE (SO*2), SULFUR TRIOXIDE (SO*3).

Waste Disposal Methods:DISPOSE OF ORIGINAL (VIRGIN) MATERIAL I/A/W
FEDERAL, STATE & LOCAL REGS. ONCE THIS PROD SORBS MERCURY VAPOR
THIS PROD THEN TAKES ON TOX CHARACTS OF MERCURY VAP SORBED & SHOULD
BE DISPOSED OF I/A/W ALL FED, STATE & LOCAL REGS FOR THE MERCURY
VAPOR.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.